Chapter 4 Controlling the Projector
Item | Description |
Logo | Sets on or off the logo display on the screen dur- |
| ing the startup. (Default, My logo, OFF) |
Background | Sets screen background to blue when no signal |
Display | input. (Blue, My logo, Black (OFF)) |
Switches on or off the | |
| the screen.(ON, OFF, CountdownOff) |
Freeze | Sets the image to freeze mode.(ON, OFF) |
Power | Sets into the selected power management mode |
management | |
| (OFF, Ready or Shut down) if the input signal is |
| interrupted and no control key is pressed for the |
| specified period of time. |
| *The specified time can be set 1 to 30 min. |
On start | Sets the |
| cord to the outlet. (ON, OFF) |
Item Description
Lamp control* ....Selects lamp control mode. (Normal, Eco, Auto)
This function may be disabled depending on the projectors.
Lamp
Corres. Value(h)......Displays the lamp use time (Corresponding value).
Reset the time after lamp replacement.
Lamp Corres. Value Reset
1.Select a
2.Click OK button to execute the reset.
Item Description
Remote control
ID.....Sets the remote control ID.(Code 1 - Code 8)
Fan speed control ...... Sets the fan control speed. (Normal, Max)
Status ...........Indicates the current fan mode.
Factory default.... Sets all of the projector control items to the fac-
tory default setting except the following items. Lamp Corres. Value, PJ time, Network PIN code, Network setting
* This function is not effective for the settings of the network unit, Network address settings, e-
mail settings, etc.
PJ lock suspend....... When the projector has a security of PIN code
lock, disable this function temporarily by pressing Yes button.
Setting procedure
1. Turn off the projector , disconnect AC cord from the outlet and then connect AC cord again.
2. Access this page with the web browser,
3. Click Yes button on the PJ lock suspend.
* This function is disabled after the projector turns on.
48
