Eiki PJNET-300 PC adjustment, Controlling the Projector, Item Description, Display area, Position

Chapter 4 Controlling the Projector

PC adjustment

Click PC Adj. on the main menu. This function is to adjust the signal from the computer connected to the projector to obtain the proper pic- ture image on the screen.

Up to 60 characters can be used for the Memo of ExMode11 to ExMode50.

Item Description

Current mode ..... Displays a current mode like VGA, SVGA, XGA. SXGA,

UXGA, WXGA, etc. or MODE1 - MODE10, EXT11

	- EXT50 which are the customized mode created by
	using the "Mode Store" function described below.
Auto PC adj	Performs automatic adjustment.
Fine sync	Performs Fine Sync adjustment.(0 ~ 31)
Total dots	Adjust the number of total dots in the horizontal
Clamp	period.
	Adjusts the phase of the clamp. (1 ~ 255)
Display area
Horizontal	Adjusts the image area horizontally.
Vertical	Adjusts the image area vertically.
Item	Description
Position
Horizontal	Adjusts the horizontal position of the screen.
Vertical	Adjusts the vertical position of the screen.
Reset	Resets the PC adjustments to the previous levels.
Mode Store	Stores the PC adjustment values. Select a mode
	no. [Mode1 - Mode10, ExMode11 - ExMode50]
	from the pull-down menu.
Mode Free	Clear the PC adjustment values. Select a mode
	no. [Mode1 - Mode10, ExMode11 - ExMode50]
	from the pull-down menu.

46

✐The PC adjustment settings can be stored up to 50 sets, 10 sets for Mode1 to Mode10 are stored into the projector and 40 sets for ExMode11 to ExMode50 are stored into the network unit.