630LT-GR Settings
The 630LT-GR’s default setting is set to enable DHCP Options. There is no need for extra settings. After initial setup, confirm the following:
•[Use PPP connection or another network adapter]in the [Network] tab of “Terminal Properties” is selected.
•Press “DHCP Option” on “Network” tab in the “Terminal Properties”. “DHCP Options” is displayed.
[Enable DHCP Option] is selected, and code numbers assigned for the DHCP options.
After completing the above, the 630LT-GR will automatically receive information such as an IP address from the DHCP Server every time the unit is turned on.
NOTE
•If the DHCP Option is used to setup the 630LT-GR for the first time, “Terminal Connection Manager” will appear because the unit automatically receives information from the DHCP Server. (“WBT Setup Wizard will not be displayed.)
•If the DHCP Option is set once and needs to be canceled, please change the key of the DHCP Server. Even if changing the DHCP Option in the 630LT-GR, the DHCP Server will overwrite the option next time the unit is restarted, and the changes in the 630LT-GR will not be effective.