English

6-4. Network Settings

Click [Network] tab to set network information for the 630LT-GR.

NOTE

•All settings shown here are previously adjusted on the “WBT Setup Wizard”.

•Please set the properties depending on the 630LT-GR connection settings.

[Use PPP connection or another network adapter]

...................................Click to use a modem connection to the WTS.

To connect to the WTS with a LAN network, set the following. [Obtain an IP address from a DHCP server]

...................................

This allows the user to receive IP information from a

 

DHCP service automatically. The DHCP service of a

 

server must be in operation to receive the information.

[Specify an IP address.] .......

If not using a DHCP service, please select this and

 

enter the information shown below.

[IP address] .........................

Type the 630LT-GR IP address.

[Subnet Mask].....................

Type the subnet mask.

[Gateway] ...........................

Type the Gateway IP address.

[Terminal Name] ................

Type a name to recognize this unit from others on the

 

network (only in use of the RDP protocol).

[Media Type] ......................

Set up the transmission speed on the network.

84 6. USING THE TERMINAL PROPERTIES