English

Modifying the settings

This enables to delete printer settings when a printer is connected to the LPT1 port or COM1 port.

1.

2.

Select LPT1 or COM1, and then click [Properties...].

“Printer Properties” dialog box is displayed.

Change the settings as needed.

[Friendly Name]..................

Changes the printer's name. (If you are naming the

 

printer, the name combination must be 31 character or

 

less.)

•When your printer is listed

[Manufactures] / [Printers]

...................................Select the manufacturer and model of your printer.

•When your printer is not listed

[User Defined].....................

Click the check box.

[Model Name] ....................

Type the model and manufacturer of your printer.

[Make this the default printer]

...................................Sets/cancels setting the printer as a default. (The

630LT-GR corresponds to only LPT1 port, and only one printer at a time can be installed. The installed printer will be always the default printer.)

Click [OK] to return to the “Terminal Properties” dialog box.

Click [OK] in the “Terminal Properties” dialog box to save the settings and close the “Terminal Properties” dialog box.

6. USING THE TERMINAL PROPERTIES 89