English

Date/Time Settings

Configure the date/time properties of the 630LT-GR.

NOTE

•The settings are referred when the client time zone function of the ICA protocol is effective.

•Date and time will return to the default settings if the power cord is unplugged.

1.

2.

Double-click the “Date/Time” icon.

“Date/Time Properties” is displayed.

[Date/Time] Tab .................

Set date, current time, or time zone. During daylight

 

saving time, click the [Daylight savings time currently

 

in effect] check box.

[NTP Server]Tab.................

Synchronize time with the NTP Server.

 

Select when to synchronize time with the NTP server

 

(on every boot up or every time clicking the

 

[Synchronize] button.)

NOTE

•Synchronizing time at startup is effective when the 630LT-GR is connecting WTS/Web Server using a network connector on the rear.

•Getting the NTP Server information from the DHCP Server needs to satisfy the following:

*Connect the WTS/Web Server by the network connector on the rear

*Use the DHCP Server to get information such as IP address.

*Set the NTP Server option at the DHCP Server.

Click [OK] to return to the “Terminal Properties” dialog box.

Click [OK] of the “Terminal Properties” to close the “Terminal Properties” and save the settings.

6. USING THE TERMINAL PROPERTIES 99