English
[Connection Preference] |
|
[Baud Rate]......................... | Set the data transmission rate from 110 to 115,200. |
[Data Bits]........................... | Set the data bits. |
[Parity]................................ | Set to check the data’s appropriate transmission. |
[Stop Bits] ........................... | Set the length of the Stop Bits. |
[Flow Control] .................... | Set Flow Control. |
[Call Option] tab
[Cancel the call if not connected within]
...................................Click the box and type the interval to the right box
before canceling the connection in case of connection failure.
[Wait for dial tone before dialing]
...................................Click to dial after dial tone.
[Wait for credit card tone]
...................................Click to set the intervals before canceling the
connection using a credit card.
[Extra Settings (Special modem commands may be inserted into the dial strings)]
...................................Enter a special modem command if needed.
Click [OK] on [Device Properties] when finished. The dialog box saves the settings and closes.
• Click the [Close] button to cancel the settings.
NOTE
•When changing settings in the [Device Properties], click the [Call Option] tab before clicking [OK] to close the window.
Click [Next>].
56 4. ADDING & CHANGING A CONNETION NAME