42 Chapter 7 Reference
● To set input signal selection [Input Selection]
Setting Function
Auto The monitor recognizes the connector through w hich PC signals are input. When
a PC is turned off or enters the powersaving mode, the moni tor automatically
displays another signal.
Manual The monitor detects only the PC’s signals currently displaying automatical ly. Select
an active input signal with .
Procedure
1. Choose <Tools> from the Adjustment menu, a nd press .
2. Choose <Input Select ion> from the <Tools> menu, and press .
The <Input Selection> menu appears.
3. Select “Auto” or “Manual” with or .
4. Press to exit the adjustment.
Attention
• When “Auto” is selected for <Input Select ion>, the monitor’s power-saving function works only when the all PCs
are in the power-saving mode.