27
Chapter 3 Setting Monitor
Chapter 3 Setting Monitor

3-1. Enabling/Disabling Mode Selection [Mode Preset]

Allows you to select the specied modes only.
Use this function when all the display modes are not available or when keeping the d isplay mode
unchanged.
Procedure
1. Choose <Tools> from the Adjustment menu, a nd press .
2. Choose <Mode Preset > from the <Tools> menu, and press .
3. Select the mode to change its set tings with or , and press .
4. Select “On” or “Off ” with or .
5. Press to exit the adjust ment.
Attention
• You cannot set all the modes d isable. Set at least one mode to “On”.

3-2. Locking Buttons [Key Lock]

This function allows you to lock to prevent changing the adjusted /set status.
Procedure
1. Press to tur n off the monitor.
2. Press holding down for at least 2 seconds to tu rn on the monitor.
The Optional Settings menu appea rs.
3. Choose <Key Lock> from the <O ptional Settings> menu, and press .
4. Select “Off ”, “Menu”, or “All” with or , and press .
Settings Buttons that can be locked
Off (Initial settings) None (All buttons are enabled)
Menu button
All All buttons excluding
5. Select “Finish” with or .
6. Press to exit.
The Optional Settings menu is closed.