Eizo CG245W - page 23

23

Chapter 2 Adjusting Screen

● To adjust the gamma value [Gamma]

The gamma value can be adjusted. The lumi nance of the monitor varies depending on the input signal ,

however, the variation rate is not proportional to the input signal. To keep the balance between the i nput

signal and the luminance of the monitor is called as “Ga mma correction”.

Adjustable range: 1.6-2.7 (0.1 unit)

Procedure

1. Choose <Color> from the Adjust ment menu, and press .

2. Choose <Gam ma> from the <Color> menu, and press .

3. Adjust the gamma value w ith or .

4. Press to exit the adjustment.

NOTE

• The default set ting for each Adobe®RGB/sRGB/EBU/REC709/SMPTE-C/DCI mo de is set to “Standard”, which is

the gamma in conformity wit h each standard.

● To adjust the hue [Hue]

This function allows you to adjust the hue.

Adjustable range: -100 to 100

Procedure

1. Choose <Color> from the Adjust ment menu, and press .

2. Choose <Advanced Sett ings> from the <Color> menu, and press .

3. Choose <Hue>, and press .

4. Adjust the hue with or .

5. Press to exit the adjustment.

Attention

• This f unction does not enable to display every color g radation.

● To adjust the color saturation [Saturation]

This function allows you to adjust the saturat ion of the color on the monitor.

Adjustable range: -100 to 100

Procedure

1. Choose <Color> from the Adjust ment menu, and press .

2. Choose <Advanced Sett ings> from the <Color> menu, and press .

3. Choose <Satu ration>, and press .

4. Adjust the satur ation of the color with or .

5. Press to exit the adjustment.

Attention

• This f unction does not enable to display every color g radation.

NOTE

• Setti ng the minimum (-100) turns the image to a mono chrome screen.

Contents

Main [Location of Caution Statement] Notice for this monitor Cleaning To use the monitor comfortably Page CONTENTS 6 Chapter 1 Introduction 1-1. Features CAUTION Be careful of the following points when using the monitor hood. 1-2. Controls and Functions 1-3. Utility Disk 10 1- 4. Basic Operation and Functions Basic operation of menu 1 2 3 12 Functions Page 14 Chapter 2 Adjusting Screen 2-1. Setting Screen Resolution Compatible Resolutions/Frequencies Digital Input (DVI/DisplayPort) Resolution Display Mode Frequency Dot Clock Setting Resolution Page Page Page Page Page 2-5. Displaying Lower Resolutions 2-6. Conguring moving image performance [Overdrive] Chapter 3 Setting Monitor 3-1. Enabling/Disabling Mode Selection [Mode Preset] 3-2. Locking Buttons [Key Lock] 28 3-3. Setting the EIZO Logo Display [Logo] 3-4. Setting Orientation [Orientation] 3-5. Setting Language [Language] Selectable languages 3-6. Setting Range of Frequency [Signal Bandwidth] Page 3-9. Restoring the Default Setting 32 Chapter 4 SelfCalibration 4-1. Executing SelfCalibration [Calibration] 4-2. Checking Calibration Results [Result] 4-3. Setting Calibration Details [Setting] 34 Set the calibration schedule for SelfCalibration. 4. Adjust using or . 5. Press to exit the adjustment. The calibration schedule is set. 36 Chapter 5 Power Saving Function 5-1. Setting the Power Saving [Power Save] Chapter 6 Troubleshooting 38 Page Chapter 7 Reference 7-1. Attaching an Arm Use the screws that hold the monitor and stand together for installation. [Attachment Procedure] 1 Page 7-3. Making Use of USB (Universal Serial Bus) 7-4. Displaying Monitor Information 7-5. Specications Main default settings (factory settings) Chapter 7 Reference Outside Dimensions Unit: mm (inch) 172 Connector Pin Assignment DVI-I con nector D isplayPort connector USB por t 7-6. Glossary Page Page 7-7. Preset Timing About TCO 03 FCC Declaration of Conformity For U.S.A. , Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity Canadian Notice HinweiseHinweise zur Auswahl des richtigen Schwenkarms fr Ihren Monitor 56 LIMITED WARRANTY LIMITED WARRANTY BEGRENZTE GARANTIE 58 GARANTIE LIMITE GARANTA LIMITADA 60 GARANZIA LIMITATA BEGRNSAD GARANTI 62 64