Elation Professional 05 FOCUS SPOT 250R, 28, Rev 10 Mounting and Installation, Mounting points

Focus Spot 250R™

6. Mounting and Installation

Mounting

The FOCUS SPOT 250R™ is fully operational in three different mounting positions, hanging upside-down from a ceiling, side mounted, or set on a flat level surface (see illustration below). Be sure this fixture is kept at least 0.5m away from any flammable materials (decoration etc.). Always use and install the supplied safety cable as a safety measure to prevent accidental damage in the event of a clamp failure (see section “b” on the next page).

Refer to regulations BGV C1 (formerly VBG 70 ) and DIN VDE0711-217 for proper installation in Europe

To ensure proper installation, only qualified staff should attempt installation.

Mounting points

The FOCUS SPOT 250R™ has been designed to hold multiple clamps on the bottom of the unit in several different orientations. Always use an appropriately rated clamp to mount this fixture to truss. Refer to the printed instructions on the bottom of the fixture for proper clamp

©Elation Professional® 13 Focus Spot 250R™