Focus Spot 250R™
©Elation Professional® 19 Focus Spot 250R™
8. FIXTURE MENU
On-Board System Menu: The FOCUS SPOT 250R™ comes with an easy to navigate
system menu. This next section will detail the functions of each command in the system
menu.
Control Board: The control panel located on the top of the fixture allows you to access the
main menu and make all necessary adjustments to the Focus Spot 250R™. During normal
operation, tapping the “MODE” key once will access the fixture’s main menu. Once in the
main menu you can navigate through the different functions and access the sub-menus
with the Up and Down buttons. Once you reach a field that requires adjusting, tap the
ENTER button to activate that field and use the UP and Down button to adjust the field.
Tapping the Enter button once more will confirm your setting. Once a setting is saved the
LED will briefly readout PASS to confirm a new setting has been made and locked into
memory. You may exit the main menu at any time without making any adjustments by
tapping the EXIT button.
MODE/ESC Button - To access the main menu locate the MODE/ESC button on the front
of the unit. Press this button to activate the system menu. Tap the UP button until you
reach the function you wish to change. When you reach the function you wish to change
tap the ENTER button once to select that menu function. When a function is selected the
menu will begin to flash, use the UP or DOWN button to change the function. Once your
changes are made tap the ENTER button yet again to lock the change in the system menu.
To exit without making any changes tap the MODE/ESC button.
Default settings shaded.
1
ADDR
A001~A511
Indicate the staring DMX address
A001 also is the setting for slave
2
TEST
T-01~T-XX
Automatically test the function
RUN
MSTR/ALON
Runs fixture as “master” or “alone”
for auto
AUDI
MSTR/ALON
Runs fixture as “master” or “alone”
for audio
3
PLAY
AUTO
OFF/ RUN / AUDI
Runs fixture when no DMX signal is
present
4
LAMP
ON/OFF
Manually switches lamp “on” and
“off”