Electro-Voice NetMax N8000 owner manual

SIGNAL PROCESSING
Sample Rate	48 kHz internal
	32 kHz - 192 kHz external
Data Format	24 Bit linear A/D and D/A conversion, 48 Bit processing
Signal Processing	2	DSPs Standard (150 MHz, 300 MIPS)
	1 DSP per Audio Module (100 MHz, 100 MIPS)
	DSP-1 Extension Module optional (+300 MIPS)
INTERFACES
Ethernet	10 / 100 MBit/s, RJ-45 (PC Control)
CAN	10... 500 kbit/s, 2 x RJ-45 (Remote Amp Control)
RS-232	2	Ports, 9pin D-Sub female (Remote Control)
USB	USB Type B on Front Panel (PC Control)
GPIO Control Port	2 x 6-pole Euro block
	4	Control Inputs (analog 0 - 10 V / logic control)
	3	Control Outputs (Relay contact to ground)
	1	Fault Output (NC Relay contact)
	3	Reference Outputs (+5 V / +10 V / GND)
N8000 GENERAL SPECIFICATIONS
Power Supply	100 - 240 V AC, 50/60 Hz
Power Consumption	90 W max. (incl. 2 x AI-1, 2 x AO-1, 1 x CM-1 modules)
Safety Class	I
Cooling	Left-to-right, 3-stage fan
Operating Temperature Range	0	°C ... 40 °C
Dimensions (W x H x D)	483 x 88.1 x 381 mm (19“, 2 HU)
Weight	N8000 (without optional modules): 7.35 kg
	AI-1 Analog Input Module: 200 g
	AO-1 Analog Output Module: 260 g
	CM-1 CobraNet™ Module: 75 g
MODULES / OPTIONS
AI-1 Analog Input Module	8 analog audio inputs, line level, electronically balanced
AO-1 Analog Output Module	8 analog audio outputs, line level, electronically balanced
CM-1 CobraNet™ Module	32 digital audio inputs and outputs, 2 CobraNet™ ports
	(Primary / Secondary) for network redundancy
DSP-1 DSP Extension Module	Internal DSP processing power and Delay-RAM extension,
	300 MIPS, 256k x 24 SRAM
MI-1 Microphone Input Module	8	microphone inputs, programmable Gain and Phantom
	Power, PAD for line level switching
DI-1 Digital Input Module	8	digital audio inputs, AES/EBU, S/PDIF and Optical for-
	mats, sample rate converters for 32-192 kHz operation

42NetMax N8000 System Controller

Owner’s manual / Bedienungsanleitung