Manuals / Electro-Voice / Home Audio / Stereo Receiver

Electro-Voice NetMax N8000 owner manual Network configuration

Models: NetMax N8000

1 48

Download 48 pages 31.71 Kb

Page 29

Manual background

Network configuration

8. Close the window Internet Protocol (TCP/IP) Properties by clicking on the OK button.

The IP configuration of the PC is now complete. In the following steps the connection of the PC with the N8000 will be established and checked.

9.Connect the network connection of your PC to the Ethernet interface of the N8000 directly with a crossover cable, or with a patch cable and a hub/switch.

Please see the Ethernet principles chapter on page 33 in the appendix of this document for more information on the details of connecting devices via Ethernet.

10.Connect the N8000 to the power supply system and switch it on by operating the power switch on the rear.

The green ON-LED (see page 11) on the front panel of the N8000 is illuminated. After some seconds the green READY-LED (see page 11) is also illuminated and signals the successful start activity of the N8000.

11.Click on Start > All Programs > Accessories > Command Prompt. The window command prompt appears.

	NetMax N8000 System Controller	29
	Owner’s manual	29
	Owner’s manual

Image 29

Electro-Voice NetMax N8000 owner manual Network configuration

Contents

Page Contents NetMax N8000 System Controller IMPORTANT SAFETY INSTRUCTIONSIMPORTANT SERVICE INSTRUCTIONS D ECLARATION HF-InterferenceC ONFORMITY Introduction 1 Introduction1.1 Description of the system 6NetMax N8000 System Controller 1.2 N8000 featuresIntroduction Introduction 1.3 Unpacking and warrantyIntroduction 1.4 Installation instruction1.5 IRIS-Net Introduction 1.6 Browser InterfaceControl Elements and Connections SIGNAL / PEAK-LEDs2 Control Elements and Connections 2.1 Front FaceplateSYSTEM STATUS-LEDs POWER-LEDUSB Interface Control Elements and ConnectionsAUDIO SLOTs 2.2 Rear PanelNetwork Module Slot Control Elements and ConnectionsRS-232Interfaces ETHERNET InterfaceREMOTE CAN BUS Control Elements and ConnectionsControl Elements and Connections Mains Connector and Power SwitchCONTROL PORT 1.Install the expansion cards 3.2 Installation of expansion cards2.Connect the power cable 3 Preparations 3.1 MountingPreparations System expansion with a network moduleExpansion of the DSP performance of the system Preparations 3.3 Interface descriptionEthernet Interface Preparations CAN InterfaceAssignment of CAN plug PreparationsPreparations USB connectionRS-232Interface Preparations Control InputsCONTROL PORT Preparations Control OutputsPreparations Analog audio connecting cableAudio Interfaces 24NetMax N8000 System Controller Digital audio connecting cablePreparations Network configuration 4 Network configuration 4.1 IntroductionExample of an Ethernet network with four N8000 Network configurationNetwork configuration 4.2 Configuration4.Double click on Internet Protocol TCP/IP 3.Click on Properties in the context menu6.Type 192.168.1.1 in the IP address input field Network configurationNetwork configuration 30NetMax N8000 System Controller Network configurationAppendix Installation in a multi-purposehall5 Appendix 5.1 Application Example 32NetMax N8000 System Controller 5.2 TroubleshootingsAppendix Check Physical Connectivity Problems Appendix Check Network Configuration of PC5.3 Ethernet principles Ruling Out Duplicate IP-AdressesAppendix IP addressesSubnet mask NetMax N8000 System Controller Automatic/Manual Allocation of IP AddressesAppendix Appendix 5.4 CAN-BusPrinciplesCreation of alternative network topologies Appendix38NetMax N8000 System Controller System ExamplesAppendix NetMax N8000 System Controller Performance SpecificationsAppendix Subnet mask Gateway 5.5 IP Address TableDevice IRIS-NetDevice NameNetMax N8000 System Controller 6.1 Specifications/Technische DatenPage SIGNAL 6.2 Block Diagram/BlockschaltbildPOWER NetMax N8000 System Controller44NetMax N8000 System Controller 6.3 Dimensions/AbmessungenPage Page Page V1.2 Subject to change withou prior notice