![](/images/new-backgrounds/1033157/3315729x1.webp)
28 – Balanced XLR Outputs
Each output channel has an electronically balanced XLR connector for connection to system amplifiers. Each output channel can output different frequency ranges depending on its assignment and
Care must be taken to assure that each output is connected to an appropriate amplifier and loudspeaker to avoid damage or unexpected results. Note that a new preset may change the assignment of channel and its frequency range. For instance an output assigned to Hi frequency speakers in one preset, may be assigned as a sub output in another. See chapter “Configurations of the
29 – AES/EBU Digital Input
In addition to the analog audio inputs, an AES/EBU digital stereo input is provided and selectable in the Setup menu. The input conforms to IEC standard 60958 Type I. Connections must be made with
30 – Balanced XLR Thru
Each analog audio input is connected to an electronically buffered and balanced output as a through connector. The signal does not go undergo any digital conversion or processing. These connectors are used to pass input audio to a second
31 – Balanced XLR Inputs
Each input has an electronically balanced, locking XLR connector. In stereo or dual modes, connections to both inputs must be made. In mono modes, only one connection need be made, typically to Input A.
32 – -6dB Pad
Input levels to the
15 | Owners Manual |