Electro-Voice Speaker System owner manual Technical Specifications, Audio

Technical Specifications

General

Mains Voltage	100-240 VAC 50-60 Hz
Power Consumption	25W

Audio

Analog Inputs	2x	XLR IN, electronically balanced
	2x	XLR THRU OUT, electronically balanced
Digital Inputs	1x	XLR AES/EBU IN
Nominal Input Voltage	1.23 V / +4 dBu
Maximum Input Voltage	8.7 V / +21 dBu
(Without -6dB Analog Pad Engaged)
Input Impedance	10k ohm
Common Mode Rejection	-80 dB @ 1 kHz (typical)
A/D Conversion	24-Bit Sigma-Delta
Outputs	6x	XLR OUT, electronically balanced
Nominal Output Voltage	1.23 V / +4 dBu
Maximum Output Voltage	8.7 V / +21 dBu
Output Impedance	50 ohm
D/A Conversion	24-Bit Sigma-Delta
Frequency Response	10 Hz-22 kHz (+/- 0.5 dB)
THD+N	< 0.01% (band limited 22Hz-22kHz)
Dynamic Range	111 dB unweighted, band limited 22 Hz - 22 kHz

Interfaces

USB	USB Type B on front panel (PC Interface)
9-pin DSUB	Software Configurable for GPI Preset Recall or
	Master/Slave

Signal Processing

Sample Rate	48 kHz
Data Format	24-Bit
Internal Processing	32-Bit Floating Point

Physical

Dimensions (WxHxD)	19 x 14 x 1.75 inches (482.6 x 355.6 x 44.45 mm)
Weight (Net)	10.1 lb (4.6 kg)
Weight (Gross)	13.0 lb (5.9 kg)

53 Owners Manual