1. To operate the grill pop out and turn the grill
control clockwise for full grill or anticlockwise
for centre section only.
2. The highest number represents the hottest
setting and the lowest the coolest setting.
3. Ensure the second oven control is in the OFF
position '0'.
THINGS TO NOTE
The cooling fan for the controls will operate in
conjunction with the grill. For more information
on the operation of the cooling fan see page 4.
The grill indicator neon will glow when the grill
is in use.
The outer element may appear to glow slightly
brighter than the inner element. This is quite
normal.
Some smoke from fat splashes may be evident
as the grill cleans itself.
USING THE TELESCOPIC RUNNERS
(where fitted)
1. Ensure the telescopic runners are pushed back
into the oven cavity before fitting the shelf.
2. Holding the front edge of the shelf with both
hands, place the rear shelf forms over the
telescopic runners.
3. Slide the shelf into position, lifting slightly at the
front so that the shelf locates into the retaining
hooks.
To remove, raise the front edge and withdraw
the shelf.
Ensure the shelf is positively located before using.
Note
Should you wish to purchase a telescopic runner
kit, this can be ordered from your local AEG
Service Centre by quoting part number (BAZD01)
948341000.
The grill is a dual circuit grill which means that the full area of the grill can be used or for economy purposes,
the centre section only can be used when cooking smaller quantities of food.
USING THE GRILL
CAUTION - ACCESSIBLE PARTS MAY BECOME HOT WHEN THE GRILL IS
IN USE. CHILDREN SHOULD BE KEPT AWAY.
THE GRILL DOOR MUST BE LEFT
OPEN DURING GRILLING. IF
CLOSED THE ELEMENTS WILL
SWITCH ON AND OFF AND THE
OVEN LIGHT WILL TURN ON AND
OFF AS A WARNING.
11
RETAINING
HOOK