Electrolux D8100-1 FITTING INTO THE CABINET

FITTING INTO THE CABINET

Using a tape measure establish the internal width

of the cabinet. Refer to page 47 if greater than

565mm.

Position the appliance in front of the cabinet. See

Fig. 8.

Take out all oven furniture before installation to

reduce the weight you need to lift. The oven door

should be taped up to keep it closed whilst lifting.

To place the appliance into the cabinetry follow the

procedure below:

N.B. Two people will be required to carry out

the lifting procedure.

Warning: Do not attempt to lift this

appliance by the handle(s).

Each person should squat either side of the

appliance.

Tilt the appliance so that your hands can support

the underside of the appliance.

Keeping your back straight, raise the appliance to

the cabinet by straightening at the knees.

Rest the rear underside of the appliance on the

cabinet floor while your hands support the front.

The appliance can be pushed fully into the cabinet.

Take care to avoid damaging the mains lead.

Ensure the appliance is central in the cabinet and

level.

Do not remove spacer fitted behind fixing holes.

When the appliance is fully housed screw the

stability screws (supplied with the appliance) into

the side of the cabinet taking care not to distort

the side trims (See Fig. 9). It is advisable to turn

each screw alternately to avoid damaging the

trims.

Switch on the appliance then refer to the operating

instructions.

52

IMPORTANT: Ensure that the oven is

switched off at the wall before any

further work is carried out. Fig.8

Fig.9

(Cable not supplied)

Contents

Main INSTALLATION CLEANING AND MAINTENANCE SERVICE AT THE END OF THE APPLIANCE LIFE IMPORTANT SAFETY INFORMATION CONTENTS FOR THE USER FOR THE INSTALLER DESCRIPTION OF THE OVEN Build-in electric multifunction double oven. GETTING TO KNOW YOUR OVEN The Control Panel The Cooling Fan for the Controls Control Panel Indicator Neons GRILL AND OVEN FURNITURE Note Telescopic Runners BEFORE USING THE OVEN FOR THE FIRST TIME When First Switching on Rating plate Preparing to use your oven Condensation and Steam Page 1) How to set the Time of Day ELECTRONIC OVEN CONTROL 2) How to set the Countdown To cancel the Countdown 3) How To Set The Oven Timer Contro A)To Set The Timer To Switch On And Off Automatically B) set the Timer to switch off only. To Cancel An Automatic Programme Automatic Cooking TO FIT THE MAIN OVEN SHELVES HOW TO SELECT MAIN OVEN COOKING FUNCTIONS AND TEMPERATURE BOOST FUNCTION PIZZA BAKING FUNCTION BOOST FUNCTION AND PIZZA BAKING FUNCTION THE MAIN OVEN FAN COOKING USES OF THE FAN OVEN PREHEATING SELECTING THE FAN OVEN COOKING TEMPERATURES BATCH BAKING Page THE MAIN OVEN - CONVENTIONAL SETTING USES OF THE CONVENTIONAL OVEN SELECTING THE CONVENTIONAL OVEN OVEN COOKING CHART ROASTING CHART ROASTING CHART ROTITHERM - FAN ASSISTED GRILLING USES OF ROTITHERM FAN ASSISTED GRILLING SELECTING ROTITHERM GRILLING COOKING TIMES ROTITHERM FAN ASSISTED GRILLING CHART SELECTING THE SINGLE GRILL USING THE TELESCOPIC RUNNERS (WHERE FITTED) THE MAIN OVEN - GRILL THE GRILL PAN AND HANDLE GRILLING CHART USES OF THE BOTTOM HEAT FUNCTION SELECTING THE BOTTOM HEAT FUNCTION THE EFFECTS OF DISHES ON COOKING RESULTS BOTTOM HEAT DEFROSTING USES OF DEFROST FEATURE SELECTING DEFROST HELPFUL HINTS WHEN BUYING AND PREPARING FOOD SELECTING THE MAIN OVEN LIGHT SAFETY CUT-OFF FUNCTION CHILD SAFETY FUNCTION MAIN OVEN MAIN OVEN LIGHT SAFETY AND ENERGY SAVING FUNCTIONS USES OF THE SECOND OVEN TO FIT THE SECOND OVEN SHELF SECOND OVEN LIGHT THE SECOND OVEN SELECTING THE SECOND OVEN USES OF THE CONVENTIONAL OVEN SELECTING THE CONVENTIONAL OVEN USING THE TELESCOPIC RUNNERS THE SECOND OVEN CONVENTIONAL SETTING Page SECOND OVEN COOKING CHART SECOND OVEN GRILL THE GRILL PAN AND HANDLE GRILLING CHART CLEANING MATERIALS CLEANING THE OUTSIDE OF THE OVEN Model D8100-1M only Cleaning the Brass Handles (where fitted) CARE AND CLEANING CLEANING INSIDE THE OVENS CARE OF STAYCLEAN SURFACES REMOVING AND REPLACING WIREWORK SIDE RUNNERS CLEANING THE GRILL AND OVEN FURNITURE CLEANING THE TRIPLE GLAZED DOOR GLASS TO REMOVE THE INNER GLASS TO REMOVE THE MIDDLE GLASS TO CLEAN THE INNER AND MIDDLE GLASS DOOR PANELS TO REPLACE THE MIDDLE AND INNER GLASS PANELS REPLACING AN OVEN LIGHT BULB IF SOMETHING DOESN'T WORK Page 0870 5 929929 SERVICE AND SPARE PARTS CUSTOMER CARE DEPARTMENT GUARANTEE CONDITIONS Standard guarantee conditions European Guarantee INSTALLATION INSTRUCTIONS TECHNICAL DETAILS WARNINGS: CHOICE OF ELECTRICAL CONNECTION NOTE: HOUSE CIRCUIT PREPARING CABINET FOR FITTING OF OVEN RECOMMENDED CABINET DIMENSIONS HOW TO FINISH UNPACKING TOOLS REQUIRED MAKING THE ELECTRICAL CONNECTIONS PREPARING CABLE TO REMOVE COVER OF MAINS TERMINAL CONNECTING TO MAINS TERMINAL CONNECTING TO A HOB OR COOKER POINT CHECKING ELECTRICAL CONNECTIONS NOTE: HOUSE CIRCUIT FITTING INTO THE CABINET Warning: Do not attempt to lift this appliance by the handle(s).