Figure 14
To remove the oven rack support for a self-clean cycle, support and lift front bottom of rack support to release front tabs. Then, rotate rack support up and out to release rear tabs. If the rack supports are not removed, the self-clean
cycle won’t start. Figure 15
Getting Started 21
BEFORE SETTING OVEN CONTROLS
Installing and Removing Oven | Removing and Replacing Oven |
| |
Rack Supports |
| Racks ALWAYS ARRANGE OVEN |
|
ALWAYS INSTALL OVEN RACK | RACKS WHEN THE OVEN IS COOL |
| |
SUPPORT BEFORE TURNING ON THE | (PRIOR TO OPERATING THE OVEN). |
| |
OVEN (WHEN THE OVEN IS COOL). | Always use oven mitts when using the oven. |
| |
| To install oven rack support, align and | To remove an oven rack, pull the rack |
| |
insert the 2 rear tabs of the rack supports |
| ||
forward. Lift up the rack off the oven rack |
| ||
to the rear holes in the oven side wall. |
| ||
| glides. To install an oven rack, locate the |
| ||
Then align the 2 front tabs of the rack |
| ||
two pinholes in the small plates at the front |
| ||
support to the front holes in the oven side |
| ||
corners of the rack. Position the back of the |
| ||
wall. Push in on rack supports to secure |
| ||
rack on the rack glides and drop the pin |
| ||
in wall. | Figure 13 |
| |
holes over the pins on the rack glides. |
| ||
|
| ||
|
| Pull oven rack forward and lift it up off the |
|
|
| oven rack glides. |
|
|
| Figures |
|
|
|
|
|
|
|
|
|
