Electrolux EI30ES55JS manual Setting the Cooktop, Available cooktop settings

Setting Surface Controls 19

SETTING THE COOKTOP

The cooktop controls provide display to help set power levels for the cooking zones located on the cooktop. These settings work the same way as traditional knob settings except

the settings are made using a touch sensitive panel and show settings using LED style displays.

Available cooktop settings	Single/Double
Your control control provides different power level settings for each
	element keypad
of the cooking or heating zones. These displays have keypads that			High setting
allow the user to first activate (ON/OFF) the needed element and			keypad
then to quickly turn that element ON using 3 preset power levels	on/off
(lo, med or hi) - see Figs. 2 through 5 -.				Med setting
In addition to the automatic settings, the + and - keypads allows for	keypad			keypad
more precise level adjustments between the automatic settings.			Lo setting
Element size indicators		Hot Surface	keypad
Some cooktop zone positions display additional size keypads -		indicator
see Fig 1- that allows the user to switch between single or dual		Fig. 1
elements sizes quickly whenever the cooking zone is active.
		hi +		hi +
Hot Surface Alert
After using any of the radiant element positions the ceramic	ON	med	ON	med
	OFF		OFF
cooktop will become very hot. Even after turning the surface
controls off, the cooktop will remain hot for some time after use.		lo -		lo -
The cooktop control monitors the temperature of the cooktop
	active
			set for low
surface and displays the message hot surface when cooktop	Fig. 2			Fig. 3
is still too hot to touch - see fig. 6. If the hot surface message
		hi +		hi +
remains displayed, the heating zone may be set again and used
for cooking.	ON
		med	ON	med
	OFF		OFF
		lo -		lo -
	set for medium		set for high
	Fig. 4			Fig. 5
! CAUTION
				hi +
Radiant surface elements may appear to have cooled after they have been turned OFF. The Hot Indicator			ON
Light will turn ON and will continue to glow until the glass cooktop has cooled down to a moderate				med
			OFF
level. The glass surface may still be hot and burns may occur if the glass surface is touched before
the indicator light has turned OFF.				lo -
Do not place plastic items such as salt and pepper shakers, spoon holders or plastic wrappings on				Fig. 6
top of the range when it is in use. These items could melt or ignite. Potholders, towels or wooden spoons
could catch fire if placed too close to the surface elements.