Electrolux EI30ES55JS manual Continue a rapid boil fry, deep fat fry, Gravies or steam vegetables

20Setting Surface Controls

SETTING THE COOKTOP (CONTINUED)

Setting cooktop elements

•Touch the ON OFF key to activate the desired heating zone.

•If the heating zone has more than one element diameter size available, press the desired element ring size symbol.

•Press the desired power level key once (hi+, med or lo-) for quick automatic settings or for more precise level settings use the hi+ or lo- keys. Each press of hi+ will increase or lo- keypad will decrease the power one level at a time. Any of these power level changes or ring changes may be made any time during the heating process.

Suggested cooktop power settings

Use the chart below to determine the suggested setting for the type of food you are preparing and refer to -Fig. 1- to help determine the power level setting when using the control display. The power level areas illustrated are only suggested areas to set the control - Fig. 2. Be sure to monitor your food whenever using the cooktop and adjust as needed for the type of food you are preparing.

				w
				o
		d	.	L
	e
M
w
o
L

Fig. 1

Medi

ON

OFF

u

m

hi +

M
e
d
.
	H
	i
	med
i	H

lo -

Notes

Recommended Surface Settings Chart

Setting	Type of Cooking
HIGH (hi)	Start most foods; bring water to boil
	and pan broiling.
MEDIUM HIGH	Continue a rapid boil; fry, deep fat fry.
MEDIUM	Maintain a slow boil; thicken sauces,
	gravies or steam vegetables.
MEDIUM LOW	Keep foods cooking, poach and stew.
LOW (lo)	Keep warm, melting and simmering.

●Pressing a cooktop ON OFF key only activates or deactivates a surface cooktop zone but will not start the heating process. Activating and powering any surface cooktop zone requires pressing two keys - the ON OFF key first and then the power level selection (+, - or med) must be added before the cooktop zone will begin heating.

●Any of the cooking zones will begin to heat ONLY when activated - See Fig. 2, p 19. If a power level is not added to the active cooking zone within 10 seconds of being active the control will automatically deactivate the cooking zone.

●If activating a surface cooking zone when no surface cooking zones are already active, you will need to press and hold the ON OFF key for a few seconds longer than normal before the first cooking zone will activate. Once any cooking zone is active, any zones added will respond immediately.