Electrolux EI30ES55JS manual Oven Controls, Sabbath Feature Continued

38Oven Controls

SABBATH FEATURE (CONTINUED)

Note: You may change the oven temperature once baking has started. Press UPPER OVEN

UPPER

OVEN, BAKE , the numeric key pads for the temperature you want (example for 425°F press

4, 2 , 5 ) and then press START TWICE (for Jewish Holidays only). Remember that the oven control will no longer beep or display any further changes once the oven is set for the Sabbath feature.

8.The oven may be turned OFF at any time by pressing CANCEL pad (this will turn the

+-

oven OFF only). To turn OFF the Sabbath feature press and hold both the HI hi and LO lo pads for at least 3 seconds. SAb will disappear from the display.

Should you experience a power failure or interruption, the oven will shut off. When power is returned the oven will not turn back on automatically. SF (Sabbath Failure) will be displayed in the oven control display and the surface element displays. The oven will remember that it is set for the Sabbath and the food may be safely removed from the oven while still in the Sabbath feature, however the oven cannot be turned back on until after the Sabbath. After the

+-

Sabbath observance turn OFF the Sabbath feature. Press and hold both the HI hi and LO lo pads for at least 3 seconds. SAb will disappear from the display and the oven may be used with all normal functions. For further assistance, guidelines for proper usage, and a complete list of models with the Sabbath feature, please visit the web at http:\\www.star-k.org.

Notes for the use of the cooktop in Sabbath mode:

•When the Sabbath feature is enabled on the oven control, it is also enabled on the cooktop. To activate the Sabbath feature, it is not necessary to have one burner ON, but it is necessary to have a Bake function active in the oven.

•When the Sabbath feature is enabled, a surface element can be turned ON by pressing the ON/OFF pad. The element will turn ON 15 to 30 seconds after the ON/OFF pad was pressed. Double elements will turn on with inner element ON only.

•When the Sabbath feature is enabled, the power level of an active element can be changed. The change will take effect after a 15 to 30 seconds delay. The element size (inner/outer) CANNOT be changed. Elements will remain with the same size selection they had before entering Sabbath mode.

•All surface element displays will show indicator lights (see Fig. 1).

Fig. 1