electrolux 71
Positioning
This appliance has been designed to be placed close to furniture units not exceeding the height of the working level (EN 60
Levelling
The appliance is provided with adjust- able small feet placed in the back cor- ners of the base.
By adjusting the small feet it is possible to ensure a uniform distribution of the liq- uids contained in pans or pots.
Gas connection
Gas connection must be carried out according to the rules in force. The manufacturing company release the unit, once tested, adjusted for the kind of gas stated on the rating plate located on the back of the range, next to connection pipe. Be sure that you are going to connect the unit to the same kind of gas written on the plate.
Connection using a rigid pipe or a flexible metal pipe
To ensure higher safety, it is recommended to carry out the connection to the gas system using rigid pipes (ex. copper) or using flexible stainless steel pipes, to avoid any stress to the unit. Gas feeding pipe fitting is Gc 1/2. For this type of installation, connection to the gas supply should be carried out using only and exclusively flexible metallic tubes in conformity with rules in force.
YES |
FLEXIBLE RUBBER |
GAS PIPELINE |
ELECTRIC WIRE |
NO |
FLEXIBLE RUBBER |
GAS PIPELINE |
ELECTRIC WIRE |
