Electrolux EKG 60111 user manual Replacement of gas oven burner nozzle

74electrolux

3b)when converting from LPG to natural gas unscrew about one-fourth turn by- pass screw, until a regular small flame is reached.

Reassemble the parts following the same procedure backards.

Check that, turning quickly the knob from the maximum position to the minimum one, the flame does not go out.

Replacement of gas oven burner nozzle

To replace the gas oven nozzle, follow this procedure:

1.Remove the bottom plate of the oven cavity (“A”);

2.Undo the two fixing screws (“C”) which keep the oven gas burner place

3.Gently slide the oven gas burner off the injector support (“D”) and slowly move it to the left hand side, taking care not to cause stress to the spark plug connection wire (“E”) and the thermocouple (“F”) conductor;

3.With a socket spanner 7 unscrew and remove the gas burner injector (“D”), and replace it with the required one (see "Burner characteristics");

4.Reassemble the burner following the same procedure in reverse.

5.Replace the Gas Type Sticker (it is located near the gas connection ramp) with the one relevant to the new gas type which is supplied with the injector kit.