Electrolux EOB 53003 user manual Electronic programmer, Setting the time of day, electrolux

Electronic programmer

	4
5	7
6	8

2 1 3

1.Push button for selecting a function

2.Decreasing control button “ ”

3.Increasing control button “ ”

4.Display

5.“Cooking Duration” pilot lamp

6.“End of cooking” pilot lamp

7.“Minute minder” pilot lamp

8.“Time of day” pilot lamp

The oven will work only if the time of day has been set. Moreover, the oven can also be operated without any programme.

In the event of a power failure, all the settings (time of day, programme setting or programme in operation) will be cancelled.

When the power is restored, the numbers in the display will flash, and the clock/timer has to be reset.

Setting the time of day

When the power supply is switched on, or after a power

failure, the “Time of day” pilot lamp

will flash on the

display.

To set the correct time of day:

1.press button “” or “ ”.

2.After the setting is carried out, wait for 5 seconds: the

“Time of day” pilot lamp

will go out and the display

will show the set time. The appliance is ready for use.

To reset the correct time of day:

1.press button repeatedly to select the “Time of day” function. The relevant pilot lamp will start flashing. Then proceed as described above.

The time of day may be reset only if no automatic

function (cook durationor end of cooking) has been set.

38electrolux