E O G 9 3 3 0
Cleaning between the outer and inner door glass
You can remove the glass from the oven and grill doors if you need to. The grill door is fitted with a trim. You must note the correct position of the trim when you remove the grill door glass.
To remove the outer glass
1Open the door so you can get at the two cross head screws on the top of the door.
2Loosen these two screws using a pozidrive screwdriver.
Please note that the door glass on your product may differ in type and shape from that shown in the diagram.
3You should hold the door glass securely in place with one hand, whilst removing the screws completely, with the other hand. If you do not do this, the door glass could fall forward. Still holding the door glass, remove the trim from the top of the grill door.
Note the correct position of the grill door trim. The oven door does not have a trim.
4Using both hands, gently tilt the top of the door glass towards you. Lift it slightly to disengage the locators at the bottom of the door.
5Clean the outer and inner glass using hot soapy water and mild abrasives such as 'Cif'.
6Replace the glass by holding it in both hands and gently placing the locators into the holes of the brackets at the bottom of the door. Push the top of the glass towards the door, and make sure the screw location holes line up. Replace the trim on top of the grill door making sure that it is correctly positioned. You can check this by looking through the air gap on the top of the door and checking that the screw location holes line up.
7Hold the glass in place with one hand and replace the cross head screws into the location holes, with the other hand.
8Tighten the screws using a pozidrive screwdriver. Close the door.
Care and cleaning
25
