Manuals / Brands / Kitchen Appliance / Oven / Electrolux / Kitchen Appliance / Oven

Electrolux FDO 900 CLEANING THE TOP OVEN ROOF, CLEANING BETWEEN THE OUTER AND INNER DOOR PANELS

1 40

Download 40 pages, 887 Kb

22

CLEANING THE TOP OVEN ROOF

The grill element is hinged to make cleaning the oven

roof easier.

Switch off the appliance from the

electricity supply before cleaning and

ensure the oven is cold.

1. Remove the wirework side runners.

2. Undo the two screws which hold the grill element

in place.

3. Gentl y pull the element downwards to allow

access to the oven roof. Do not force the element

downwards.

4. Clean the top of the oven with Cif cream cleaner

and a sponge scourer. If heavily soiled, aerosol

oven cleaners may be used following the

instructions given above for cleaning the grill / top

oven compartment.

5. Gently push the grill element back into place.

6. Fit the screws to hold the element in plac e and

tighten firmly.

7. Replace the wirework side runners.

CLEANING BETWEEN THE OUTER ANDINNER DOOR PANELS

To prevent damaging or weakening the

door glass panels avoid the use of the

following:

· Household detergents and bleaches

· Impregnated pads unsuitable for non-

stick saucepans

· Brillo/Ajax pads or steel wool pads

· Chemical oven pads or aerosols

· Rust removers

· Bath/Sink stain removers

The outer oven door glass panels are removable for

cleaning.

Under no circumstances should the door

assembly be detached from the product for

cleaning. Please refer to the cleaning

instructions.

Ensure the screws are firmly in place after

cleaning.

Contents

Main IMPORTANT SAFETY INFORMATION INSTALLATION CHILD SAFETY DURING USE CLEANING AND MAINTENANCE CONTENTS FOR THE USER FOR THE INSTALLER DESCRIPTION OF THE APPLIANCE GETTING TO KNOW YOUR APPLIANCE 12.00 BEFORE USING THE APPLIANCE RATING PLATE PREPARING TO USE YOUR APPLIANCE WHEN FIRST SWITCHING ON THE COOLING FAN FOR THE CONTROLS GRILL AND OVEN FURNITURE THE ELECTRONIC TIMER TO CANCEL THE COUNTDOWN 3. SETTING THE OVEN TIMER CONTROL A) TO SET THE TIMER TO SWITCH ON AND OFF AUTOMATICALLY B) TO SET THE TIMER TO SWITCH OFF ONLY 4. TO CANCEL AN AUTOMATIC PROGRAMME 5. TO RETURN THE APPLIANCE TO MANUAL 6. THINGS TO NOTE 7. AUTOMATIC COOKING Page THE GRILL PAN AND HANDLE HINTS AND TIPS In order to become acquainted with the Most foods should be placed on the grilling grid Adjust the height of the grilling grid and grill pan When using the centre section of the dual grill, Food should be thoroughly dried before grilling t o When toasting bread use the cranked shelf in GRILLING CHART USES OF THE TOP OVEN HOW TO USE THE TOP OVEN Turn the Top Oven/Grill Selector to Top Oven. Turn the Top Oven temperature control to the THE TOP OVEN THINGS TO NOTE The indicator neon will glow. It may turn ON and The cooling fan for the controls will operate. The oven light will come on. Page USES OF THE MAIN FAN OVEN HOW TO USE THE MAIN OVEN Turn the main oven temperature control to the THE MAIN OVEN THINGS TO NOTE The oven light will come on when the contro l is The indicator neon will glow. It may turn ON and Page OVEN COOKING CHART ROASTING CHART Page CARE AND CLEANING CLEANING MATERIALS CLEANING THE OUTSIDE OF THE APPLIANCE CLEANING THE CONTROL KNOBS AND HANDLES CLEANING THE TOP OVEN ROOF CLEANING BETWEEN THE OUTER AND INNER DOOR PANELS TO REMOVE THE OUTER DOOR GLASS TO REPLACE THE OUTER DOOR GLASS TO CLEAN THE INNER GLASS DOOR CLEANING INSIDE THE OVENS TO REMOVE THE WIREWORK RUNNERS CLEANING THE SHELVES, WIREWORK RUNNERS AND GRILL/OVEN FURNITURE COOKING TO REDUCE SOILAGE Cook at the recommended temperatures. Higher Use minimal, if any, extra oil or fat when roasting It is NOT necessary to add water to a meat tin Covering joints during cooking will also prevent REPLACING AN OVEN LIGHT BULB SOMETHING NOT WORKING SERVICE AND SPARE PARTS 0870 5 929929 CUSTOMER CARE DEPARTMENT Page Page Page Page Page HOW TO FINISH UNPACKING Place packed appliance next to the space in Remove the appliance packing except for bottom Ensure the owner is given these operating TO REMOVE COVER OF MAINS TERMINAL First remove retaining screw with pozidrive Page FITTING INTO THE CABINET Using a tape measure establish the internal width Position the appliance in front of the cabinet. Take out all oven furniture before installation to To place the appliance into the cabinetry fo llow