Electrolux FDO 900 CARE AND CLEANING

21

Before cleaning always allow the cooling

fan to cool the appliance down before

switching off at the electricity supply.

CLEANING MATERIALS

Before using any cleaning materials on your

appliance, check that they are suitable and that the ir

use is recommended by the manufacturer.

Cleaners that contain bleach should NOT be used as

they may dull the surface finishes. Harsh abrasives

should also be avoided.

CLEANING THE OUTSIDE OF THE

APPLIANCE

DO NOT use abrasive cleaning materials e.g. Hob

Brite, Brillo pads or scourers on painted or printed

finishes as damage may occur. Regularly wipe o ver

the control panel, oven doors and appliance si des

using a soft cloth and liquid detergent. To prevent

streaking on stainless steel models (where

applicable) finish with a soft cloth. Any spillage on

the stainless steel finish must be wiped off

immediately.

Stainless Steel cream cleaners are abrasive and

should be avoided as they may dull the surface

finish.

Do not attempt to remove any of the control

knobs from the appliance as this may cause

damage and is a safety hazard.

Under no circumstances should the door

assembly be detached from the product for

cleaning. Please refer to the cleaning

instructions.

CLEANING THE CONTROL KNOBS AND

HANDLES

It is strongly recommended that only hot soapy water

is used for cleaning the control knobs and door

handles. ANY OTHER CLEANING MATERIALS

WILL DULL THE SURFACE FINISH.

CARE AND CLEANING

Contents

Main IMPORTANT SAFETY INFORMATION INSTALLATION CHILD SAFETY DURING USE CLEANING AND MAINTENANCE CONTENTS FOR THE USER FOR THE INSTALLER DESCRIPTION OF THE APPLIANCE GETTING TO KNOW YOUR APPLIANCE 12.00 BEFORE USING THE APPLIANCE RATING PLATE PREPARING TO USE YOUR APPLIANCE WHEN FIRST SWITCHING ON THE COOLING FAN FOR THE CONTROLS GRILL AND OVEN FURNITURE THE ELECTRONIC TIMER TO CANCEL THE COUNTDOWN 3. SETTING THE OVEN TIMER CONTROL A) TO SET THE TIMER TO SWITCH ON AND OFF AUTOMATICALLY B) TO SET THE TIMER TO SWITCH OFF ONLY 4. TO CANCEL AN AUTOMATIC PROGRAMME 5. TO RETURN THE APPLIANCE TO MANUAL 6. THINGS TO NOTE 7. AUTOMATIC COOKING Page THE GRILL PAN AND HANDLE HINTS AND TIPS In order to become acquainted with the Most foods should be placed on the grilling grid Adjust the height of the grilling grid and grill pan When using the centre section of the dual grill, Food should be thoroughly dried before grilling t o When toasting bread use the cranked shelf in GRILLING CHART USES OF THE TOP OVEN HOW TO USE THE TOP OVEN Turn the Top Oven/Grill Selector to Top Oven. Turn the Top Oven temperature control to the THE TOP OVEN THINGS TO NOTE The indicator neon will glow. It may turn ON and The cooling fan for the controls will operate. The oven light will come on. Page USES OF THE MAIN FAN OVEN HOW TO USE THE MAIN OVEN Turn the main oven temperature control to the THE MAIN OVEN THINGS TO NOTE The oven light will come on when the contro l is The indicator neon will glow. It may turn ON and Page OVEN COOKING CHART ROASTING CHART Page CARE AND CLEANING CLEANING MATERIALS CLEANING THE OUTSIDE OF THE APPLIANCE CLEANING THE CONTROL KNOBS AND HANDLES CLEANING THE TOP OVEN ROOF CLEANING BETWEEN THE OUTER AND INNER DOOR PANELS TO REMOVE THE OUTER DOOR GLASS TO REPLACE THE OUTER DOOR GLASS TO CLEAN THE INNER GLASS DOOR CLEANING INSIDE THE OVENS TO REMOVE THE WIREWORK RUNNERS CLEANING THE SHELVES, WIREWORK RUNNERS AND GRILL/OVEN FURNITURE COOKING TO REDUCE SOILAGE Cook at the recommended temperatures. Higher Use minimal, if any, extra oil or fat when roasting It is NOT necessary to add water to a meat tin Covering joints during cooking will also prevent REPLACING AN OVEN LIGHT BULB SOMETHING NOT WORKING SERVICE AND SPARE PARTS 0870 5 929929 CUSTOMER CARE DEPARTMENT Page Page Page Page Page HOW TO FINISH UNPACKING Place packed appliance next to the space in Remove the appliance packing except for bottom Ensure the owner is given these operating TO REMOVE COVER OF MAINS TERMINAL First remove retaining screw with pozidrive Page FITTING INTO THE CABINET Using a tape measure establish the internal width Position the appliance in front of the cabinet. Take out all oven furniture before installation to To place the appliance into the cabinetry fo llow