Electrolux FDO 900 - page 31

31

CHOICE OF ELECTRICAL CONNECTION

· The appliance should be operated using at least

6mm2 twin core and earth PVC insulated

multicore cable. Please choose from the most

appropriate after reading the different methods:-

· By connecting the appliance to a cooker point

having a double pole isolating switch with at least

3mm contact separation in all poles and

protected with a fuse or miniature circuit breaker

at your mains fuse box.

· If you wish to connect an oven and a hob to a

cooker point you can by connecting the oven and

hob separately to the cooker point. Oven and

hob units should be separately connected to a

cooker point. See Fig. 2.

NOTE: It is good practice to :

· Fit an Earth Leakage Circuit Breaker to your

house wiring.

· Wire your appliance to the latest IEE regulations.

PREPARING CABINET FOR FITTING OF

OVEN

· Make sure that the cabinet is the correct size for

the appliance to be fitted (Ref. Fig. 3).

· If the size is between 565-570mm, then the

cabinet should be modified so that at the screw

fixing points the recommended dimension of at

least 560-565mm is maintained. The modification

should ideally be localised to ensure that after

screw fitment the oven is securely f ixed into

position.

· The cabinet must be stable and level by firml y

securing it to the wall or floor. If necessary,

make arrangements to ensure the shelf upon

which the oven will rest is level.

· When the appliance is installed ensure a

minimum gap of 2mm is maintained between the

trim on the bottom edge of the appliance, and

any corresponding door / panel underneath.

Contents

Main IMPORTANT SAFETY INFORMATION INSTALLATION CHILD SAFETY DURING USE CLEANING AND MAINTENANCE CONTENTS FOR THE USER FOR THE INSTALLER DESCRIPTION OF THE APPLIANCE GETTING TO KNOW YOUR APPLIANCE 12.00 BEFORE USING THE APPLIANCE RATING PLATE PREPARING TO USE YOUR APPLIANCE WHEN FIRST SWITCHING ON THE COOLING FAN FOR THE CONTROLS GRILL AND OVEN FURNITURE THE ELECTRONIC TIMER TO CANCEL THE COUNTDOWN 3. SETTING THE OVEN TIMER CONTROL A) TO SET THE TIMER TO SWITCH ON AND OFF AUTOMATICALLY B) TO SET THE TIMER TO SWITCH OFF ONLY 4. TO CANCEL AN AUTOMATIC PROGRAMME 5. TO RETURN THE APPLIANCE TO MANUAL 6. THINGS TO NOTE 7. AUTOMATIC COOKING Page THE GRILL PAN AND HANDLE HINTS AND TIPS In order to become acquainted with the Most foods should be placed on the grilling grid Adjust the height of the grilling grid and grill pan When using the centre section of the dual grill, Food should be thoroughly dried before grilling t o When toasting bread use the cranked shelf in GRILLING CHART USES OF THE TOP OVEN HOW TO USE THE TOP OVEN Turn the Top Oven/Grill Selector to Top Oven. Turn the Top Oven temperature control to the THE TOP OVEN THINGS TO NOTE The indicator neon will glow. It may turn ON and The cooling fan for the controls will operate. The oven light will come on. Page USES OF THE MAIN FAN OVEN HOW TO USE THE MAIN OVEN Turn the main oven temperature control to the THE MAIN OVEN THINGS TO NOTE The oven light will come on when the contro l is The indicator neon will glow. It may turn ON and Page OVEN COOKING CHART ROASTING CHART Page CARE AND CLEANING CLEANING MATERIALS CLEANING THE OUTSIDE OF THE APPLIANCE CLEANING THE CONTROL KNOBS AND HANDLES CLEANING THE TOP OVEN ROOF CLEANING BETWEEN THE OUTER AND INNER DOOR PANELS TO REMOVE THE OUTER DOOR GLASS TO REPLACE THE OUTER DOOR GLASS TO CLEAN THE INNER GLASS DOOR CLEANING INSIDE THE OVENS TO REMOVE THE WIREWORK RUNNERS CLEANING THE SHELVES, WIREWORK RUNNERS AND GRILL/OVEN FURNITURE COOKING TO REDUCE SOILAGE Cook at the recommended temperatures. Higher Use minimal, if any, extra oil or fat when roasting It is NOT necessary to add water to a meat tin Covering joints during cooking will also prevent REPLACING AN OVEN LIGHT BULB SOMETHING NOT WORKING SERVICE AND SPARE PARTS 0870 5 929929 CUSTOMER CARE DEPARTMENT Page Page Page Page Page HOW TO FINISH UNPACKING Place packed appliance next to the space in Remove the appliance packing except for bottom Ensure the owner is given these operating TO REMOVE COVER OF MAINS TERMINAL First remove retaining screw with pozidrive Page FITTING INTO THE CABINET Using a tape measure establish the internal width Position the appliance in front of the cabinet. Take out all oven furniture before installation to To place the appliance into the cabinetry fo llow