Electrolux FDO 900 - page 30

30

WARNINGS

· This appliance must be installed by a

qualified electrician/competent person.

Safety may be impaired if installation is

not carried out in accordance with these

instructions.

· This appliance must be earthed.

· Do not remove the screws from the earth

tab extending from the oven mains

terminal block (Fig. 1).

· Before connecting the appliance make

sure that the voltage of your electricity

supply is the same as that indicated on the

rating plate. This is situated on the lower

front frame of the appliance and can be

seen upon opening the door. Alternatively

the rating plate may also be found on the

back or top of some models (where

applicable).

· Do not alter the electrical circuitry of this

appliance.

THINGS TO NOTE

· This appliance is designed to be fitted in c abinets

of the recommended dimensions as shown

(Fig.3).

· If your cabinet interior dimension is between 565-

570mm the oven may still be fitted. However, a

minor modification to the cabinet will be required

to reduce the aperture size down to 560-565 m m,

to allow the product to be securely screwed into

the cabinet.

· The dimensions given provide adequate air

circulation around the unit within the cabinet,

ensuring compliance with BS EN60-335.

· Enquiries regarding the installation of the cooker

point, if required, should be made to your

Regional Electricity Company to ensure

compliance with their regulations.

· The appliance socket switch should be outside

the cabinet but within 2m of the appliance to

make it accessible to switch off the appli ance in

case of an emergency.

· To protect the hands, wear gloves when lifting

the oven into its housing.

Do not lift the appliance by the handles.

NOTE: HOUSE CIRCUIT

Earth leakage and continuity tests must be carried

out before the appliance is connected to the mains

supply and re-checked after fitting.

INSTALLATION INSTRUCTIONS

Fig.1

Contents

Main IMPORTANT SAFETY INFORMATION INSTALLATION CHILD SAFETY DURING USE CLEANING AND MAINTENANCE CONTENTS FOR THE USER FOR THE INSTALLER DESCRIPTION OF THE APPLIANCE GETTING TO KNOW YOUR APPLIANCE 12.00 BEFORE USING THE APPLIANCE RATING PLATE PREPARING TO USE YOUR APPLIANCE WHEN FIRST SWITCHING ON THE COOLING FAN FOR THE CONTROLS GRILL AND OVEN FURNITURE THE ELECTRONIC TIMER TO CANCEL THE COUNTDOWN 3. SETTING THE OVEN TIMER CONTROL A) TO SET THE TIMER TO SWITCH ON AND OFF AUTOMATICALLY B) TO SET THE TIMER TO SWITCH OFF ONLY 4. TO CANCEL AN AUTOMATIC PROGRAMME 5. TO RETURN THE APPLIANCE TO MANUAL 6. THINGS TO NOTE 7. AUTOMATIC COOKING Page THE GRILL PAN AND HANDLE HINTS AND TIPS In order to become acquainted with the Most foods should be placed on the grilling grid Adjust the height of the grilling grid and grill pan When using the centre section of the dual grill, Food should be thoroughly dried before grilling t o When toasting bread use the cranked shelf in GRILLING CHART USES OF THE TOP OVEN HOW TO USE THE TOP OVEN Turn the Top Oven/Grill Selector to Top Oven. Turn the Top Oven temperature control to the THE TOP OVEN THINGS TO NOTE The indicator neon will glow. It may turn ON and The cooling fan for the controls will operate. The oven light will come on. Page USES OF THE MAIN FAN OVEN HOW TO USE THE MAIN OVEN Turn the main oven temperature control to the THE MAIN OVEN THINGS TO NOTE The oven light will come on when the contro l is The indicator neon will glow. It may turn ON and Page OVEN COOKING CHART ROASTING CHART Page CARE AND CLEANING CLEANING MATERIALS CLEANING THE OUTSIDE OF THE APPLIANCE CLEANING THE CONTROL KNOBS AND HANDLES CLEANING THE TOP OVEN ROOF CLEANING BETWEEN THE OUTER AND INNER DOOR PANELS TO REMOVE THE OUTER DOOR GLASS TO REPLACE THE OUTER DOOR GLASS TO CLEAN THE INNER GLASS DOOR CLEANING INSIDE THE OVENS TO REMOVE THE WIREWORK RUNNERS CLEANING THE SHELVES, WIREWORK RUNNERS AND GRILL/OVEN FURNITURE COOKING TO REDUCE SOILAGE Cook at the recommended temperatures. Higher Use minimal, if any, extra oil or fat when roasting It is NOT necessary to add water to a meat tin Covering joints during cooking will also prevent REPLACING AN OVEN LIGHT BULB SOMETHING NOT WORKING SERVICE AND SPARE PARTS 0870 5 929929 CUSTOMER CARE DEPARTMENT Page Page Page Page Page HOW TO FINISH UNPACKING Place packed appliance next to the space in Remove the appliance packing except for bottom Ensure the owner is given these operating TO REMOVE COVER OF MAINS TERMINAL First remove retaining screw with pozidrive Page FITTING INTO THE CABINET Using a tape measure establish the internal width Position the appliance in front of the cabinet. Take out all oven furniture before installation to To place the appliance into the cabinetry fo llow