OPERATING INSTRUCTIONS
4.No bleaching or chlorine-containing cleaning agents are to be used for cleaning. Utensils are to be thoroughly rinsed with water and dried after cleaning. The surfaces of appliances are of corrosion resistant chrome nickel steel. They are to be washed down with hot soapy water with the addition of a stan- dard grease solvent. Avoid cleaning with steel brushes, steel wool, copper scouring pads or cloths, products containing sand, etc. as such media destroy the surfaces and create the conditions for corrosion formation. Spraying appliances or parts of appliances with a water jet or high pressure cleaning equipment is harmful and can cause malfunction. This is there- fore prohibited.
Note:
The type and concentration of solvents used for cleaning the surfaces must comply with the code of the Federal Regulations 21 CFR Part 178.1010.
Page 14 | 62.9696.01 |
