46 Program unit
SECONDLANGUAGE(COIN)
Select one of the available languages to be shown as second language.
Note that this function is only available on machines equipped with the
coin interface software, where the user menu in the display is presented
with two languages.
LANGUAGETIMEOUTSEC.(AHL/OPL)
Specify with the knob the time after which an unused machine should
return to the set language. The time is given in steps of 1 second; 0 - 2550
seconds.
SEC.LANGUAGEACTIVE(COIN)
Select if the second language shall be used on the display or not.
Yes = The second language will be displayed.
No = The second language will not be displayed.
COINVALUE1 and 2
Specify with the knob the value (0 999) for the respective coin slot.
For example: Coin 1, 1 = 1 EURO
Coin 2, 5 = 5 EURO
Coin 1, 50 = 50 Cent
Coin 2, 100 = 1 EURO
Settingthepriceto300andselectingDECIMALINPRICE
will display the price as 3:00.
DECIMALINPRICE(COIN)
On machines with coin counter, the price can be displayed with or without
colon (0:00 or 000).
Yes = The colon is displayed.
No = The colon is not displayed.
TIMEOUTDISPLAYSEC.
Specify with the knob the time after which the machine should reset a
program selection that has not started. The time is given in steps of 10
seconds; 0 - 2550 seconds.
TIMEOUT,END,BUZSEC.
Specify with the knob the time during which the buzzer should sound at
the end of the program unless the buzzer is turned off manually. The time
is given in seconds; 0 - 255.
PAUSEBUZZERTIMEOUT
Specify with the knob the time during which the buzzer should sound for a
pause unless the pause is interrupted manually. The time is given in se-
conds; 0 - 255.