Elite Real AXIOM Using Realaxiom Without Computer, Computer Before Installing, Realaxiom Software

Connecting the PC to the console

Use the USB cable 9 to connect the console of the RealAxiom to the PC.

Connect the wider flat plug to the USB socket of the computer and the plug on the other end into the matching socket in the console (ill. 14).

WARNING. DO NOT CONNECT THE USB CABLE TO THE COMPUTER BEFORE INSTALLING THE REALAXIOM SOFTWARE.

The difference of the plugs at the two ends of the cable will avoid incorrect connections.

Connecting the console to the resistance unit

Use the flat cable J to connect the console of the RealAxiom to the resistance unit. The plug at one end of the cable fits into the matching socket in the console (illustration 14) and the plug on the other end into the matching socket in the resistance

CABLE CONNECTION

GB

unit. The difference of the plugs at the two ends of the cable will avoid incorrect connections.

NOTE. DO NOT CONNECT THE USB CABLE TO		Connecting the resistance unit
THE COMPUTER BEFORE INSTALLING THE
		Connect the plug coming from the cadence sensor
REALAXIOM SOFTWARE.
		6 to the resistance unit. The socket is in the shell
		of the resistance unit faced downwards.
		Insert the plug coming from the resistance unit to
		the mains power supply.
		Make sure that the power unit R works correctly
		by checking the green led on the console lights up
	14 or flashes.

If the led is not on, the console-resistance unit and/ or the resistance unit-mains connection has not been fitted correctly.

Fasten the 3 cables to the unit using the provided cable clamps in order to prevent any accidental damage of the connectors. See Illustration 15.

15

USING REALAXIOM WITHOUT COMPUTER

RealAxiom can be used without connecting it to a PC. When the console is not connected to the PC, RealAxiom will operate independently.

The green led on the console will flash when operating RealAxiom without connecting it to a PC. The resistance will be at minimum level when operating RealAxiom independently.

Push the “+” key on the console to increase the resistance level and push the “-” key on the console to decrease the resistance level.

There are 8 resistance levels in total. After 20 seconds of inactivity the resistance will automatically return to the minimum level.

18