Emerson 3000 , , 







The chilled water cooling coil is designed for closed- loop applications using properly maintained water. It is constructed of copper tubes and aluminum fins. A- frame coils are used on downflow units and V-frame coils are used on upflow units. To ensure quality, the coil is manufactured to the highest standards in the industry.



The flow of chilled water through the cooling coil is controlled by an electronic modulating motor. The microprocessor control will activate the motor when a need for cooling or dehumidification exists. The motor will position the valve to precisely match the needs of the conditioned space.



All chilled water piping within the Challenger 3000 is fully insulated to assure full system capacity and prevent condensation.



The fully insulated control valve gives the condi- tioned space the precise cooling needed by electronic equipment. Its unique design requires no overtravel linkages and never requires adjustment.





The flow switch will activate the alarm system and/ or shut down the system should the chilled water supply be interrupted. The switch is factory wired and mounted in the chilled water valve compart- ment.



For special applications, a high pressure, modulating 3-way or 2-way valve can be provided. The valve is designed for 400 psig (2758 kPa) water pressure.

  


			

			



	
		
	
		

	DISCONTINUED
	PRODUCT