The condensate pump, mounted in the bottom of most units, is used for condensate water only.
Complete with sump, motor and pump assembly and automatic control.
Standard model has single float.
Adual float con- densate pump which includes connections to unit, common alarm, unit shut-
down and one customer N/O contact is also available.
| |
| ||||
|
|
|
|
|
|
|
|
|
| | | ||
|
| |
|
|
|
|
| | | | | ||
|
|
|
|
|
|
|
|
| | | | | |
|
|
|
|
|
|
|
|
| | | | | |
|
|
|
|
|
|
|
|
| | | | | |
|
|
|
|
|
|
|
|
| | | | | |
|
|
|
|
|
|
|
Clean, pure steam is generated in a disposable canis- ter that is complete with supply and drain valves, electronic controls and steam distributor. The humidifier is provided with an automatic flush cycle to lengthen service life. An indicator on the Chal- lenger 3000 monitor panel is activated when the can- ister should be changed.
The remote temperature/ humidity sensors permit monitoring room conditions from an external source. They are encased in an attractive case and are pro- vided with a plug compatible shielded cable in virtu- ally any length.
The disconnect operat- ing handle protrudes through the front of the system for easy access. Meets NEC codes.
The locking disconnect switch, mounted in the electrical panel, is con- nected to the safety lock dead front panel of the system and is inter- locked mechanically. In
this way the panel can’t be opened until the switch is in the off position. And it complies with local codes as well as those of the NEC.
Available in heights from 9" to 24" (228.6 to 609.6mm) in 3" (76.2mm) increments, adjustable +1- 1/2" (38.1mm). Allows for installation and connection of the Challenger 3000 prior to installation of the raised floor. A modular,
| DISCONTINUED |
| PRODUCT |
