Emerson CF2500S01 Trouble Shooting, Maintenance, IMPORTANT CARE INSTRUCTIONS for your Ceiling Fan

!WARNING: FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER BEFORE TROUBLE SHOOTING YOUR FAN.

Trouble Shooting

TROUBLE	PROBABLE CAUSE	SUGGESTED REMEDY
1. Fan will not start.	1. Fuse or circuit breaker blown.	1. Check main and branch circuit fuses or
		circuit breakers.
		! WARNING: Make sure main power is
		turned off.
	2. Loose power line connections to the fan,	2. Check line wire connections to fan and
	or loose switch wire connections in the	switch wire connections in the switch
	switch housing.	housing.
2. Fan sounds noisy.	1. Blades not attached to fan.	1. Attach blades to fan before operating.
	2. Loose screws in motor housing.	2. Check to make sure all screws in motor
		housing are snug (not over-tight).
	3. Screws securing fan blade flanges to	3. Check to make sure the screws which
	motor hub are loose.	attach the fan flanges to the motor hub
		are tight.
		! WARNING: Make sure main power is
		turned off.
	4. Wire connectors inside switch housing	4. Check to make sure wire connectors in
	rattling.	switch housing are not rattling against
		each other or against the interior wall of
		the switch housing.
	5. Screws holding blades to flanges are loose.	5. Tighten screws securely.
3. Fan wobbles	1. Setscrew in motor coupling is loose.	1. Raise motor cover and tighten setscrew
excessively.		securely.
	2. Setscrew in hanger ball/downrod assembly	2. Tighten the setscrew in the hanger ball/
	is loose.	downrod assembly.
	3. Screws securing fan blade flanges to motor	3. Check to be sure screws which attach
	hub are loose.	the fan blade flanges to the motor hub
		are tight.
	4. Fan blade flanges not seated properly.	4. Check to be sure the fan blade flanges
		seat firmly and uniformly to the surface
		of the motor hub. If flanges are seated
		incorrectly, loosen the flange screws and
		retighten according to step 15 or 17 in
		Sections “A” or “B” “Assembly Instructions”.
	5. Hanger bracket and/or ceiling outlet box	5. Tighten the hanger bracket screws to the
	is not securely fastened.	outlet box, and/or secure outlet box.
	6. Fan blades out of balance.	6. Interchanging an adjacent (side-by-side)
		blade pair can redistribute the weight
		and result in smoother operation. Or use
		supplied balancing kit to balance blades.

Maintenance

IMPORTANT CARE INSTRUCTIONS

for your Ceiling Fan

Periodic cleaning of your new ceiling fan is the only maintenance that is needed.

When cleaning, use only a soft brush or lint free cloth to avoid scratching the finish.

Abrasive cleaning agents are not required and should be avoided to prevent damage to finish.

!WARNING

Do not use water when cleaning your ceiling fan. It could damage the motor or the blades and create the possibility of an electrical shock.

13