TROUBLESHOOTING:
When a malfunction occurs, it may not be serious and can be corrected easily. The following table describes the most common problems and solutions. Please read this table thoroughly before calling your DVR dealer.
PROBLEM |
| SOLUTION | |
No power | • | Check power cord connections. | |
|
|
| |
| • | Confirm that there is power at the outlet. | |
|
|
| |
Not responding when any of the | • | Check if it is under Key Lock mode. | |
buttons are pushed | • | Press the "MENU" & "ENTER“ keys together to exit Key Lock mode | |
|
|
| |
No recorded video | • | Check if the HDD is installed properly. | |
|
|
| |
Timer Record enable does not | • | Check if the Time Enable is set to YES. | |
work |
|
| |
No live video | • | Check camera video cable and connections. | |
|
|
| |
| • | Check monitor video cable and connections. | |
|
|
| |
| • | Confirm that the camera has power. | |
|
|
| |
| • | Check camera lens setting. | |
|
| ||
NTSC & PAL System switch | To switch the system, press “FF” for NTSC system, and | ||
“REW” for PAL system. (Refer to Page 3 "Getting Started"). | |||
| |||
|
|
| |
