Maxtor SC324 manual Main Menu Control, Timer, Enter

MAIN MENU CONTROL:

Enter the MENU screen by pressing the Menu button. Scroll through the 12 options by pressing the UP and DOWN buttons. To enter a sub-menu, press the ENTER button once the correct selection has been made. To exit the Main Menu, press the Menu button.

Outlined below are the buttons used for Menu setting :

“▲” and “▼” : Scroll up and down within a menu option

“◄” and “►” : Scroll sideways within a menu option that has been selected

“+ ” and “ - ” : Increase and decrease the number or change values when an option is selected and is blinking

ENTER	: Select a submenu/an option under a submenu for browsing / modification
MENU	: Complete modification of a menu option; exit a menu

(MENU)

There are 12 options available in the Main Menu:

TIMER CAMERA RECORD ALARM DWELL PIP MOTION DISPLAY REMOTE USER SYSTEM EVENT

TIMER ----------	Program Timer Recording
CAMERA -------	Camera Setup
RECORD -------	Recording Mode Setup
ALARM ---------	Alarm Setup
DWELL ---------	Dwell time Setup
PIP ---------------	Picture in Picture Setup
MOTION -------	Motion Detection Setup
DISPLAY -------	Display Mode Setup
REMOTE -------	Remote Control Setup
USER -----------	User Password Setup
SYSTEM -------	System Setup
EVENT ---------	Event List

After 60 seconds of Inactivity in the Menu mode, the system will go back to the live camera screen

1.TIMER

This Submenu allows you to Schedule times in which you’re programming the DVR to record automatically.

(i) DAY

Select the day, or days of the week (Mon–Fri/Sat-Sun/Daily) that you wish to schedule the DVR to automatically record.

NOTE :

1.Change the date by “+” and “-” buttons.

2.If you have selected the date and Timer recording set from a specific day to a new day, then the Timer Recording Schedule will interpret the recording time as a whole week. For a specific date of Timer recording Schedule, it is not recommended to set Ending Time over 23:59.

(MENU)

TIMER

CAMERA RECORD ALARM DWELL PIP MOTION DISPLAY REMOTE USER SYSTEM EVENT

For example: If you set Timer Schedule Day as Sunday, and START from 11:30 am, but End on 00:20 am, then Recording Timer Schedule is set as from every Sunday's 11:30 am to next Sunday‘s 00:20 am. If you only want to set Recording Timer Schedule from every Sunday 11:30 am to Monday 00:20 am, then you should set Recording Timer Schedule as

Sunday from 11:30 am to 23:59 pm, and Monday from 00:00 am to 00:20 am. -7-