SYSTEM INCLUDES:
4 CHANNEL DVR | OWNER’S | An 80 GB or 120GB |
HDD may be included | ||
| MANUAL | depending on the DVR |
|
| purchased |
Accessories pack, | Power Adapter & Cord | |
including the external | ||
(DC 19V, 2A) | ||
alarm block | ||
|
CHECK YOUR PACKAGE TO MAKE SURE THAT YOU RECEIVED THE COMPLETE
SYSTEM, INCLUDING THE COMPONENTS SHOWN ABOVE.
GETTING STARTED:
1.Connect the AC power cord and plug it into an electrical outlet. The POWER LED will illuminate orange. Other LED indicators will turn ON and illuminate RED. It takes approximately 5 to15 seconds to boot the system with the message : “ HDD Detecting ”. Once successfully connected, the POWER LED will change to a green color, and the Alarm LED will be ON.
2.Before operating the DVR, set the systems “time” first. (refer to page.16).
NOTE : 1. If the HDD is not installed correctly or not installed, the “HDD not found” message will appear for 3 seconds and then return to a 4 CH Multiplexer display mode.
2 If the keys on the DVR are locked, the default password is “0000” to disable the key lock.
3.To switch the system (back to DVR Function), pull out the AC power cord. Before you reconnect the power, press “FF” for the NTSC system or “REW” for the PAL system. Note: North America is on an NTSC system, while European countries use PAL. Reconnect the AC power cord, and the DVR will
