(iii)RECORD MODE - There are three recording settings :
&MULTIPLEX.
(RECORD)
RECORD IPS | 30 |
QUALITY | NORMAL |
RECORD MODE |
(a)
(b)
(c)Multiplex – The DVR will record all cameras in individual full screen samples.
Note: 1) The Quad mode will offer a higher IPS rating per camera, but are recorded at a lower resolution.
Example: If the Record IPS is set to 30, all 4 cameras are recorded at this setting at a resolution of 320 x 240.
2)The Multiplex mode offers a higher resolution (Full Screen 720 x 480) rating per camera, but at a lower IPS.
Example: If the Record IPS is set to 30, this number is divided by the 4 cameras. This yields 7.5 IPS per camera.
4.ALARM
(i)ALARM ENABLE – The alarm will be activated by a trigger on the external alarm input. It is triggered by an event occurrence, such as a camera’s PIR alarm function when the setting is” YES”. Selecting “NO” will disable the alarm setting.
(ii)ALARM DURATION – Set the length of the alarm time. The DVR
will emit a buzzer if enabled in system setting. The Default setting is 10 Sec. Options are 10 Sec, 15 Sec, 20 Sec, 30 Sec, 1 MIN, 2 MIN, 3 MIN, 5 MIN, 10 MIN, 15 MIN, 30 MIN, ALWAYS, AUTO.
NOTE : When the setting is set to AUTO, the alarm will continue for the duration of the external alarm
(ALARM)
ALARM ENABLE ALARM DURATION RECORD IPS QUALITY RECORD MODE
(MENU)
TIMER CAMERA RECORD ALARM DWELL PIP MOTION DISPLAY REMOTE USER SYSTEM EVENT
YES
15 MIN
30 NORMAL