User Instructions UM1M820BNA
Spec No. 1M820BNA (Model M820B) Issue AH, March 4, 2013
Spec No. 1M820DNA (Model M820D)
Chapter 2. Operation 31
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Also set “Maximum EQ Time” in same menu.
WEB Menu Navigation: Device Information / Battery Group / Settings Tab / Automatic Equalize.
Once Automatic Equalize is enabled, additional parameters appear.
WEB Menu Navigation: Device Information / Battery Group / Settings Tab / Cyclic Equalize.
Once Cyclic Equalize is enabled, additional parameters appear.
WEB Menu Navigation: Quick Settings / “Float/Equalize” Settings / once Automatic Equalize and/or
Cyclic Equalize is enabled, additional parameters appear.
Also set “Maximum Equalize Charge Time” in same menu.
2.5.32 Setting Battery Parameters Local Menu Navigation: Main Menu / Settings / Battery / Battery # / enter parameters.
WEB Menu Navigation: Device Information / Battery Group / Battery # / select the Settings Tab and enter
parameters.
2.5.33 Setting Battery Capacity Parameters Local Menu Navigation: Main Menu / Settings / Battery / Battery # / Rated Capacity.
WEB Menu Navigation: Device Information / Battery Group / Battery # / select the Settings Tab and enter
the Battery Rating parameter.
2.5.34 Setting Battery Block and Battery Midpoint Monitoring (if equipped with an EIB Assembly) Local Menu Navigation: Main Menu / Settings / EIB / EIB 1 / enter the following parameters.
WEB Menu Navigation: Device Information / EIB Group / EIB 1 / select the Settings Tab and enter the
following parameters.
Parameters
Voltage Type
Blk V Diff(12V) or Blk V Diff(Mid)
Block In-Use
2.5.35 Setting IP Communications Parameters Local Menu Navigation: Main Menu / Settings / Communication / enter parameters.
WEB Menu Navigation: Maintenance / Network Configuration / enter parameters.
2.5.36 Setting External Shunts (connected to the EIB Assembly) Local Menu Navigation: Main Menu / Settings / EIB / EIB1 / enter the following parameters.
WEB Menu Navigation: Device Information / EIB Group / EIB 1 / select the Settings Tab and enter the
following parameters.
Parameters
Shunt # Current
Shunt # Voltage
Num Batt Shunts
Num Load Shunts
2.5.37 Setting External Shunts (connected to the SM-DU+ Assembly) Local Menu Navigation: none.
WEB Menu Navigation: Device Information / SMDUP Group / SMDUP 1 / select the Settings Tab and
enter the following parameters.