The HBAnyware Utility User Manual Page 98
Diagnostics

Performing Diagnostic Tests

Use the Diagnostics tab to do the following:
• Run these tests on Emulex HBA's installed in the system:
• PCI Loopback (see page 102)
• Internal Loopback (see page 102)
• External Loopback (see page 102)
• Power-On Self Test (POST) (see page99)
• Echo (End-to-End) (see page 103)
• Quick Test (see page99)
• Perform a diagnostic dump ( see page 100)
• View PCI registers and wakeup parameter (see page 100)
• Control HBA beaconing (see page 99)
Figure 52: Diagnostics tab
Note: All diagnostic tests and diagnostic dumps can only be performed on the local system
or on remote systems connected with TCP/IP access. Diagnostic tests and
diagnostic dumps cannot be performed on remote systems connected with Fibre
Channel access.