The HBAnyware Utility User Manual Page 61
fcp-bind-WWPN Global Inactive N/A N/A No Setup persistent FCP
bindings based on a target
device’s WWPN. This binding
guarantees that target
assignments will be preserved
between reboots. The format
for a bind entry is
“NNNNNNNNNNNNNNNN:lpf
cXtY” where
NNNNNNNNNNNNNNNN is a
16 digit representation of
the targets WorldWide Port
Name, X is the driver instance
number and Y is the target
assignment. Multiple
entries must be separated by
a comma (,) with the last entry
terminated with a semi-colon
(;). A sample entry follows:
fcp-bind-
WWPN="21000020370cf8263
:lpfc1t0";
fcp-class Controller
Specific 3 2 3 Yes The lpfc driver is capable of
transmitting FCP data in
Class2 or Class 3. The lpfc
driver defaults to using
Class 3 transmission.
fdmi-on Global 0 0 2 No This driver property controls
the fdmi capability of the lpfc
driver. If set to 0 (default), fdmi
is disabled. A value of 1
enables fdmi without
registration of "host name"
port attribute, while a value of
2 enables fdmi with
registration of "host name"
port attribute.
ip-class Controller
Specific 3 2 2 Yes Fibre Channel is capable of
transmitting IP data in Class2
or Class 3. The lpfc driver
defaults to using Class 3
transmission.
link-speed Controller
Specific 0 0=auto select
1=1G
2=2G
4=4G
No Sets link speed.
Table 3: LPFC.conf Parameters (Continued)
Property Name Scope Default Min Max Dynamic Comments