The HBAnyware Utility User Manual Page 101
Running Advanced Diagnostic Tests
The Advanced Diagnostics feature gives you greater control than the Quick Test over the type of
diagnostics tests that run. Through Advanced Diagnostics, you can specify which tests to run, the
number of cycles to run and what to do in the event of a test failure.
To run advanced diagnostics tests:
Click Advanced Diagnostics Test on the Diagnostics tab to view the Advanced Diagnostics dialog box.
You can run four types of tests:
• PCI Loopback
• Internal Loopback
• External Loopback
• End-to-End (ECHO)
Test results and the status of running tests, are time stamped and appear in the Test Log area.
Figure 56: Advanced Diagnostics
Note: You cannot run the External Loopback test and ECHO test concurrently. If you select
External Loopback the ECHO test section is disabled and vice versa.