The HBAnyware Utility User Manual Page 24
• The “Operational” state indicates that the HBA is connected to the network and operating
normally.
• All other states indicate that the HBA is not connected to the network. Green HBA icons with
red descriptive text indicate that the HBA is offline. These offline states are:
• “User offline” - The HBA is down or not connected to the network.
• “Bypassed” - The HBA is in Fibre Channel discovery mode.
• “Diagnostic Mode” - The HBA is controlled by a diagnostic program.
• “Link Down” - There is no access to the network.
• “Port Error” - The HBA is in an unknown state; try resetting it.
• “Loopback” - An FC-1 mode in which information passed to the FC-1 transmitter is
shunted directly to the FC-1 Receiver. When a FC interface is in loopback mode, the
loopback signal overrides any external signal detected by the receiver.
• “Unknown” - The HBA is offline for an unknown reason.
• Link Speed - The link speed of the HBA in gigabits per second.
Viewing Detailed HBA InformationThe Adapter Details tab contains detailed information associated with the selected HBA.
To view the detailed attributes:
1. Select Host or Fabric sort.
2. Select an HBA in the discovery-tree.
3. Select the Adapter Details tab.
Figure 15: Adapter Details tab
Adapter Details Field Definitions
Adapter Details Area
• Symbolic Node Name - The FC name used to register the driver with the name server.
• Hardware Version - The JEDEC ID board version of the selected HBA.
• Serial Number - The manufacturer assigned serial number of the selected HBA.