Z8 Encore!® Flash Microcontroller Development Kit
User Manual
7
The 9 V DC universal power supply features three different plug configu- rations, the power supply and a tool that aids in removing one plug con- figuration to insert another.
Follow the steps below to substitute one plug configuration for another:
1.Using the removal tool, place the power supply in the round hole at the top of the current plug configuration.
2.Press down to disengage the keeper tab and push the plug configura- tion out of its slot.
3.Select the plug configuration of choice for your location, and insert it into the slot left by the previous plug configuration.
4.Push the new plug configuration down until it snaps into place (see Figure 4).
Figure 4. Inserting a New Plug Configuration
Installation |
