Encore electronic Z8ENCORE000ZCO, UM014605-0208 user manual J6.9-J6.11-Modem Enable/Disable

Z8 Encore!® Flash Microcontroller Development Kit

User Manual

Table 7. Configuration Headers and Jumpers (Continued)

24

		Related Headers,
Header	Function	Registers or Devices
J11	SocketModem Power
	(3 V DC/5 V DC)
J12	RS-485_1_EN
J13	RS-485_2_EN
J14	RT_1
J15	RT_2

Table 8 through Table 13 list jumper information concerning the shunt status, functions, and devices affected of selected jumpers.

Table 8. J6.9–J6.11-Modem Enable/Disable

Shunt Status Function		Device Affected
IN	Modem connector (P2) is	UART1 cannot communicate through P2.
	disabled	Ports D and F can be assigned to functions
		other than UART1.
OUT	Modem connector (P2) is	If the embedded SocketModem is not in the
	enabled	socket, UART1 communicates through P2.

Table 9. J6.12–J6.14-Console Enable/Disable

Shunt
Status	Function	Device Affected
IN	Console connector (P1) is disabled	If J6.12–14 is IN and J10 is IN, Port A
		(3-5) is assigned to IrDA; if J10 is
		OUT Port A (3-5) is assigned to
		UART0.
OUT	Console connector (P1) is enabled	None

UM014605-0208 Z8 Encore!® Evaluation Board