Z8 Encore!® Flash Microcontroller Development Kit
User Manual
9
Getting Started
Using ZDS II
Follow the steps below to open an existing project:
1.Connect the Evaluation board to the host PC’s serial communications port using the Smart Cable.
2.Apply 9 V DC power to the Evaluation board.
3.Run the ZDS II Software (Start > Programs > ZDS
Encore! F640x_<Version>ZDS
4.Select Open Project from the File menu. The Open Project dialog box appears.
5.Select samples. The samples folder appears.
6.Select the Z8F640x_ledBlink folder and then the src folder to access the ledBlink.pro project file.
7.Select the ledblink.pro file. The initial ZDS II program screen opens.
8.Click Rebuild All and then the Reset icon 
to
connect and download the code to the Evaluation board.
9.Click Go icon 
to start the program.
For more information, refer to Zilog Developer Studio
Installation |
