Z8 Encore!® Flash Microcontroller Development Kit
User Manual
Table 6. Header J8 (Continued)
23
Pin No Signal Name | Function | Direction Comments | |
57 |
| Reserved (see note) | |
|
|
|
|
58 |
| Reserved (see note) | |
|
|
|
|
59 |
| VDD |
|
|
|
|
|
60 |
| GND |
|
Note: Do not use pins marked Reserved when designing Expansion Modules. All the signals are driven directly by the MCU.
Configuration Headers/Jumpers
Configuration headers/jumpers help to configure the board. Table 7
lists the function of each header, and related headers, registers, or devices.
Note: The default settings for all jumpers is OUT.
Table 7. Configuration Headers and Jumpers
|
| Related Headers, |
Header | Function | Registers or Devices |
J1 | RJ11 |
|
|
|
|
J2 | Modem connector | Header 32 |
|
|
|
J3 | Modem connector | Header 9 |
|
|
|
J4 | Modem connector | Header 2 |
|
|
|
J6.12 | Console Enable/Disable | J2 |
|
|
|
J6.11 | Modem Enable/Disable |
|
|
|
|
J7 | External Vref | Internal Vref Control |
|
|
|
J8 | Expansion Module |
|
| Header |
|
|
|
|
J9 | Vref test point | R5 |
|
|
|
J10 | IrDA Enable/Disable | J6.12 |
|
| (GND) |
|
|
|
Z8 Encore!® Evaluation Board |
