Change channel | Energy Speaker Systems LTV46DA manual

Settings

Picture Audio Timer

Auto Tuning

Austria

Belgium

Belgium-Dutch

Croatia

Czech

Denmark

Finland

France

Germany

Move	OK: Select

		Install		Setup		Option

		Auto Tuning		Italy

		Programme			12

		Colour		PAL

		System			BG

		Manual Tuning		S23

		Fine Tuning		217.25

		Name		S23

		Sound		Stereo / Dual 1

		Weak Signal Boost			Off

		Programme Edit
		MENU: Previous				EXIT: Exit

1Press . To return to the main menu, press

several times.

2	Press	or	and select INSTALL.
3	Press	or	and select AUTO TUNING.

4Press .

5Select the country where you want to operate

the unit.
6 Press or	to select the desired setting.

7Press to start tuning. Press to interrupt tuning.

The tuning starts and the TV channels are listed.

8After tuning is completed a menu in which you can make the settings opens.

You can also make the settings later. Note that TV must be selected as a signal source for this menu to be active.

Change channel

Use this function to set the channel for individual stations.



Picture	Audio		Timer	Install		Setup			Option

				Auto Tuning		Italy

				Programme			12

				Colour		PAL

				System			BG

				Manual Tuning			S23

				Fine Tuning		217.25

				Name			S23

				Sound		Stereo / Dual 1

				Weak Signal Boost			Off

				Programme Edit

Move	0~9 Adjust			MENU: Previous					EXIT: Exit

1Press . To return to the main menu, press

several times.

2	Press	or	and select INSTALL.
3	Press	or	and select PROGRAMME.
4	Press	or	and select the desired channel.

5Adjust the settings in the other menus.

6Press to save the settings.

18

Image 20

Energy Speaker Systems LTV46DA manual Change channel, Use this function to set the channel for individual stations

Contents

LTV46DA Page Content Reduce Noise Channel Groups Conformity Disposal Unpacking and Setup SafetyUnit Remote control Batteries Mains cable Scope of Supply Unpacking and Setup Location Intended purpose Rear View Viewing the Control PanelsFront View Remote Control Connecting to a Device with Scart Socket Connecting to two Devices with Scart SocketConnections and Start of Operation Connections for TV Reception Connecting to the Roof Aerial Connecting to a Device without Scart Socket Connecting to Cable Reception Connecting to HeadphonesConnecting Camcorders and Video Games Connecting Camcorders and Video Games by AV Cable With the output sockets of the external devices Connecting Camcorders and Video Games by S-Video CableConnecting Camcorders and Video Games by Scart Cable AV 3 or AV 4 on the television set Connecting to a ComputerConnecting to External Devices with Component Input Connecting the Digital Audio Output Connecting Several DevicesConnecting Mains Cable Connecting to the Hdmi Connection Connecting HDMI/DVI Cable Inserting the Batteries Settings Switching OnSwitching Off Setting up for Operation Tuning Starting Automatic Tuning TV StationsOpen, Select and Close Menus Press Change channel Use this function to set the channel for individual stations Press . To return to the main menu, press Several times Set Colour SystemSet System Use this function to tune the channels manually Manual TuningFine Tuning Sound Settings Change Channel NameUnit can record and play back stereo sounds Press or Select Name Improve Signal Quality Use this function to improve poor signal qualityPress Select Install or Adjust the settings Press to save the settings Reduce Noise Channel GroupsWatch Favourite Channel Use this function to reduce picture noise Set Wide Screen Format Set Screen LanguageSet Aspect Ratio Set Picture Mode Display if no Wide Screen Signal is Received Press to open the desired menu Additional Picture SettingsSet Individual Colour Channels Audio Settings Adjust Individual Audio FrequenciesSet volume Set Balance Adjust Medium and Low Frequencies Is a registered trademark Set Time Enter the time using the key pad Press to save the settingsSet Sound Source Set Switch on Time Use this function to set a time when the unit turns onSet Time by Station Press Select on or OFF or Set Switch off Time Automatic Switch offAutomatic Switch off if no Signal is Received Use this function to set a time when the unit turns off Set Duration Switch Off if no Key is PressedSet On-Screen Display Activate Child Lock Child LockSet Transparency Restore Default Settings for the ComputerPress Press the mains switch on the back of the unit Set Characters for Teletext Watch Current Television Program Set VolumeWatching Recall a Favourite Channel Select SourceSelect Input Press Press repeatedly until you select the desired channel Watch Two Programs at the Same Time PIP Set Picture-in-Picture Size Set Picture-in-Picture PositionTeletext Use this function to set the size of the small picture Set Picture Mode while Watching Adjust Picture Size while WatchingStill Picture Show Time Set Sound Effect while Watching Set Sound while WatchingSet Stereo/Mono while Watching Use this function to set the sound effects Cleaning and Troubleshooting Cast in black and white. Adjust the colour settings See chapter Restore Default onCheck wether the connecting cable is properly connected to Cannot be displayed. Change the settings in the computer Technical specifications Pixel TypePb/Pr 1360 x Memo Memo Memo